Significantly lower temperature
Maximum polymerisation temperature* of Genta Mectacem^® 3
74.3° C (i.e. 10 degrees lower than current standard cements)

*In vitro tests in compliance to ISO 5833: 1992 standards

Mectacem^® comply to the EEC Guide Lines 93/42/CEE and to their different requirements for bone cements. The standard viscosity cements Mectacem^® 1 and Genta Mectacem^® 1 are for digital application while the low viscosity cements Mectacem^® 3 and Genta Mectacem^® 3 are for syringe use. The liquid component is sterilized by micro-filtration while the powder component is sterilized by radiation. A final sterilization is carried out by ethylene oxide gas sterilization.

Indications
Mectacem^® bone cements are intended for the fixing of cemented prosthesis in arthroplasties. Genta Mectacem^® are intended for a similar use when there is a possible risk of infection.

Contraindications
Mectacem^® should not be used where there is hypersensivity to any of the components of the cement or to Gentamicin in the case of use of Genta Mectacem^®.

Precautions for use
Operating theatre temperature affects polymerisation time. Low temperatures increase setting times.
Specific instructions are to be found in the Instructions for Use leaflet enclosed.