HIGH PERFORMANCES WITH NO DRAWBACKS
The Versafitcup System increased its product range thanks to the introduction of the HighCross double mobility liner: the alternative to Metal-On-Metal Large Heads and Ceramic-On-Ceramic. This new product combines all the advantages of Double Mobility design with the enhanced properties of cross-linked polyethylene:

• The Double Mobility design includes different features giving important benefits: a low wear rate; a low dislocation rate; an increased Range of Motion.
• The Highcross material guarantees a low wear rate, reducing the risk of one of the main causes of implant failure: osteolysis due to polyethylene wear debris.

The Versafitcup Highcross Double Mobility Liner has important benefits when compared to conventional cup design:

1 Low dislocation rate (the diameter responsible for hip stability is the liner diameter, due to the retentive mechanism for the femoral head).

2 Low wear rate thanks to the Highcross dual mobility and third articulation.

3 Big Range of Motion thanks to increased head/neck ratio.

• Better than standard UHMWPe liners: - Further wear reduction thanks to Highcross technology.⁽²⁾
• Better than Metal-on-Metal: No risk of metal ions release.
• Better than Ceramic-on-Ceramic: No risk of liner fracture - No squeaking.

⁽¹⁾ Highcross is the highly cross-linked UHMWPE from Medacta^®.
⁽²⁾ A.S. Greenwald, J.P. Garino. Alternative bearing surfaces: the good, the bad, and the ugly. J Bone Joint Surg 83-A, Suppl 2 Pt 2: 68-72, 2001.